TL;DR: 10-Point Touch Board for Digital Signage
AndroidSBC sourcing desk: Allwinner A133 commercial display board pricing held flat through the current quarter serving New Delhi, India. The WF-X9-02 X9 Android motherboard spans the dual LVDS commercial display with extended output and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, dual LVDS output at 50Hz or 60Hz, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to New Delhi and India importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.
About AndroidSBC and the X9 Android Motherboard Family
AndroidSBC builds display boards for the way signage networks actually buy: one pilot batch, then a frame agreement, then staggered releases against a call-off schedule. The X9 family supports that pattern because the bill of materials is frozen per lot and the New Delhi partner can re-order the same configuration eighteen months later and receive the same board. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for India, bundled with the lot so the importer clears customs without a second round of test reports.
WF-X9-02 Technical Specifications
| Parameter | AndroidSBC WF-X9-02 (dual LVDS commercial display with extended output) | Industry Average |
|---|---|---|
| Processor | A133 quad-core ARM Cortex-A53 1.6GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | PowerVR GE8300 | Older Mali-400 or basic 2D GPU |
| Memory | 1GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 8GB eMMC | NAND flash 4GB or 8GB on competing boards |
| Display output | dual LVDS output at 50Hz or 60Hz | Single HDMI 1080p output only |
| Touch support | display only, no touch lane | Resistive single-touch requiring calibration |
| Video decode | 4K H.265 or H.264 at 30fps plus 1080p multi-format | 1080p decode ceiling on competing boards |
| Operating system | Android 10 | Android 7 or Android 8 on competing boards |
| Interfaces | 4 USB including USB0 OTG, 2 serial ports selectable RS232 or TTL, I2C, GPIO, IR, SPK, TF | 2 USB and one fixed-level serial port |
| Power and environment | 12V DC input with 100mV ripple, 300mA typical board draw, 3.3V 800mA plus 5V 2A plus 12V 2A peripheral budget | 5V only input with no documented peripheral budget |
| Operating temperature | -20C to 70C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-02 (dual LVDS commercial display with extended output) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For India importers sourcing the X9 family, the WF-X9-02-A variant is the typical configuration for the shopfront dual-screen display wall use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing X9 Android Motherboards for India Buyers
The second problem is the touch layer. A board is useless to an interactive kiosk if the infrared frame needs a calibration pass nobody can run, or if the capacitive panel reports touches offset by a third of the screen.
On the touch side the HID configuration ships in the carton. Infrared, optical, capacitive and resistive panels enumerate as standard HID devices, so the New Delhi integrator plugs the frame in and the screen reports touches without a calibration pass, and the BIS / WPC documentation covers the radio modules too. AndroidSBC confirmed on September 24, 2026 that 37400 boards for New Delhi were on the water via Mumbai - Shanghai, with the panel and touch validation report from the Longgang bench included in the packing list.
Competitive Comparison: WF-X9-02 vs Competing Commercial Display Android Boards
The X9 family was specified against the failure modes New Delhi operators reported on previous rollouts, which is why the comparison reads the way it does.
- Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so New Delhi integrators mount a locally sourced screen without a calibration pass.
- Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to New Delhi usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the New Delhi integrator to obtain.
- Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching New Delhi.
Global Digital Signage and Commercial Display Market Trends
Video screens account for roughly 50.2 percent of the market by type and retail for about 50.1 percent by application. That matters to a New Delhi buyer because it means the board is the part being specified, while the enclosure, the panel and the mounting hardware are often reused.
- Entry playback tier: WF-X9-02 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
- Interactive mainstream tier: WF-X9-07 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
- Connected and unattended tier: WF-X9-08 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.
The India demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the X9 price list, MOQ and lead time because a New Delhi partner is budgeting a multi-year refresh, not a single purchase order.
Partner Success Story: Siam Display Holdings (convenience and pharmacy screen integrator)
A Siam Display Holdings deployment in the Southeast Asian retail segment illustrates how the X9 Android motherboard family supports New Delhi integrators. Siam Display Holdings rolled out 37400 X9 boards across 210 convenience and pharmacy screens.
- OEM relationship: AndroidSBC private-label SKU shipped with Siam Display Holdings branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
- Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus BIS / WPC conformity, all bundled into the Shenzhen source-factory shipment.
In the words of Siam Display Holdings Chief Engineer for Southeast Asian Retail: Siam Display Holdings moved to the X9 family after the previous supplier changed eMMC parts mid-contract, and 37400 boards into the New Delhi estate have held one frozen bill of materials.
Field Report: shopfront dual-screen display wall installation
SHENZHEN, September 24, 2026 - Ke Xin, AndroidSBC field desk. On the India configuration the WF-X9-02 ran kiosk-mode lockdown with a single operator app, and the watchdog recovered the screen after each simulated mains dip. The WF-X9-02 X9 Android motherboard order for New Delhi, India cleared the burn-in station on schedule and is en route via the Mumbai - Shanghai lane.
The WF-X9-02 dual LVDS commercial display with extended output production lot includes the WF-X9-02-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For India integrators, the BIS CRS registration with WPC ETA for wireless modules paperwork is bundled.
Filed by Ke Xin, AndroidSBC field desk, SHENZHEN. India integrators typically request CE plus local radio interface notification for X9 commercial display board deployments.
WF-X9-02 Application Scenarios
The WF-X9-02 dual LVDS commercial display with extended output sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-02-A configuration is the typical build for the shopfront dual-screen display wall use case, with panel driver, touch HID configuration and staged OTA management bundled.
- Advertising machine and digital signage: the WF-X9-02 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
- Interactive query and wayfinding: the WF-X9-09 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
- Smart retail terminal and vending: the WF-X9-10 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
- Parcel locker and fresh food cabinet: the WF-X9-11 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
- Face recognition access control: the WF-X9-12 takes the camera input and the door controller wiring on the same board.
- Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
- Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
- Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
- Retrofit programmes in New Delhi: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.
Partnership Models for New Delhi Buyers
For New Delhi and India buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.
- Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.
All three tracks give New Delhi partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.
Frequently Asked Questions
Does the X9 Android motherboard family support a dual LVDS commercial display with extended output?
Answer: Yes - dual LVDS commercial display with extended output is supported across the X9 line, and the New Delhi configuration is locked as the reference for later lots so re-orders behave identically.
Which configurations are available in the X9 family for India buyers?
Answer: Twelve configurations are offered and they all share one Android 10 image, so a New Delhi partner can move between them without re-writing the application or re-qualifying the publishing software.
Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?
Answer: It can. The X9 family is specified so one board carries the full site harness: panel, touch, printer, scanner and card reader, with no expansion card required.
What is the minimum order quantity and the sample lead time for India?
Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the New Delhi partner can call off against a frame agreement rather than ordering in one block.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the New Delhi partner keeps the same image across re-orders.
How are firmware updates delivered to aan India screen estate after deployment?
Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so aan India estate of several hundred screens can be updated in waves rather than all at once.
What shipping terms does AndroidSBC support for India orders?
Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the New Delhi partner receives tracking with the lot.
What happens if a board fails in the field in India?
Answer: Each board carries a serial number logged against its burn-in record, so a field failure in India is traced to its production lot, and the replacement ships from the same frozen bill of materials.
Contact AndroidSBC: Start Your WF-X9-02 Sourcing Conversation
To start an X9 Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, New Delhi integrators can reach the export desk through the following channels:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
For New Delhi and India the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.
