8GB RAM 64GB eMMC Guide Board for Dual-Screen Guide, WF-G3399, AndroidSBC, New Delhi

TL;DR: 8GB RAM 64GB eMMC Guide Board for Dual-Screen Guide

AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-G guide kiosk board family serving New Delhi, India. The WF-G3399 smart guide kiosk Android motherboard spans the dual-screen high-definition guide kiosk and eleven sister models in the WF-G series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 64-bit SoC with the ARM Mali-T860 MP4 GPU, dual HDMI 2.0 4K output plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to New Delhi and India importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means New Delhi integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. India buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. AndroidSBC keeps buffer stock on the Rockchip and Allwinner tiers so New Delhi and India orders do not wait on a wafer allocation, and each production lot is locked to one BOM for traceability.

WF-G3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3399 (dual-screen high-definition guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For India importers sourcing the WF-G family, the WF-G3399-A variant is the typical configuration for the hotel lobby and resort directory terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for India Buyers

The sixth obstacle is lifecycle mismanagement. New Delhi programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and India venue fit-out cycles are longer than the parts remain in production.

AndroidSBC treats the driver layer as part of the product. The WF-G smart guide kiosk Android motherboard family ships with capacitive and IR touch, QR code, NFC, barcode, thermal printer, RFID, ID card reader, camera and relay drivers integrated, so a New Delhi integrator writes the directory application rather than kernel patches for India sites. AndroidSBC booked 128900 boards for New Delhi and India on the Mumbai - Shanghai lane as of September 18, 2026, the 5th release on this programme.

Competitive Comparison: WF-G3399 vs Competing Smart Guide Kiosk Android Boards

AndroidSBC positions the WF-G family on breadth rather than on a single benchmark number: eight silicon options, twelve models, one driver package and one update channel. That framing is what New Delhi and India procurement teams compare against a two-tier competitor line-up.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Screen estates keep pulling board demand: dual-screen high-definition guide kiosk programmes in India are the near-term driver and New Delhi integrators are quoting against 2026 delivery windows. Grand View Research sized the global interactive kiosk market at USD 34.79 billion in 2024 and models a 7.2% CAGR to USD 52.74 billion by 2030, with hardware holding more than 44% of revenue. The practical read for New Delhi is that the dual-screen high-definition guide kiosk board is a platform decision that locks in the content stack for the life of the estate.

• Mall floor directories and tenant finders: WF-G3399 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G6180 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G6180 and the industrial WF-G5270 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G5270 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

Two numbers decide aan India guide kiosk programme: how many screens a venue actually needs, and how many years the estate has to be supported. AndroidSBC plans the WF-G family against both and shares the model with New Delhi integrators on request.

Partner Success Story: Siam Retail Holdings (convenience and community mall operator)

A Siam Retail Holdings deployment in the Southeast Asia convenience retail segment illustrates how the WF-G guide kiosk board family supports New Delhi integrators. Siam Retail Holdings deployed 128900 WF-G compact guide boards across convenience and community mall enquiry counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Siam Retail Holdings branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BIS / WPC conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Siam Retail Holdings Head of Store Systems for Southeast Asia Retail: Siam Retail Holdings picked the RK3566 compact SKU for its New Delhi counters because housing depth drove the board size, and AndroidSBC held the 128900-unit schedule through three mall opening waves in India.

Field Report: lobby directory terminal installation at a business hotel group

SHENZHEN, September 18, 2026 - Dian Mo, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3399 boards booted with the full peripheral set attached and enumerated every module before the dual-screen high-definition guide kiosk content service started. The WF-G3399 smart guide kiosk Android motherboard order for New Delhi, India cleared the burn-in station on schedule and is en route via the Mumbai - Shanghai lane.

The WF-G3399 dual-screen high-definition guide kiosk production lot includes the WF-G3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For India integrators, the BIS / WPC conformity plus BIS CRS registration with WPC ETA for wireless modules paperwork is bundled.

Filed by Dian Mo, AndroidSBC field desk, SHENZHEN. India integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3399 Application Scenarios

The WF-G3399 dual-screen high-definition guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3399-A configuration is the typical build for the hotel lobby and resort directory terminal use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3399 plus WF-G8800 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G8801 plus WF-G3399 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G3600 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G3601 plus WF-G8800 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G8801 plus WF-G3601 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G8800 plus WF-G3600 carry the guest orientation flow in New Delhi.
• Exhibition and museum interpretive display points: WF-G3399 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G3601 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in New Delhi: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for New Delhi Buyers

Three partnership models are open on the WF-G smart guide kiosk Android motherboard family for New Delhi and India, and they differ in how much of the design the partner owns.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

One production line in Longgang serves all three tracks, so a New Delhi partner who starts on the distribution track and later commissions an ODM design stays on the same India supply chain.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a dual-screen high-definition guide kiosk?

Answer: Yes. The WF-G family ships dual-screen high-definition guide kiosk as a stock configuration on Rockchip and Allwinner silicon alike, flashed and functionally tested at the Wanlin Longgang source factory before the lot leaves the line for India.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-G family?

Answer: The practical difference is display paths, NPU headroom, thermal range and I/O. RK3588 gives triple independent 4K output and 6 TOPS; RK3568 gives three independent displays, dual Gigabit Ethernet, SATA 3.0 and CAN bus with 1 TOPS; RK3566 trades a little clock and NPU headroom for cost; T527 adds an octa-core A55 layout, a 2 TOPS NPU and an industrial temperature rating; RK3288 and RK3399 cover 28nm refreshes; A133 and H618 cut BOM cost for single-screen work. AndroidSBC maps RK3399 to the deployment rather than to the headline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for India?

Answer: Yes. The Longgang factory keeps the CE, FCC, RoHS and REACH declarations on file for the WF-G family and adds BIS / WPC plus BIS CRS registration with WPC ETA for wireless modules for India shipments. New Delhi importers receive the full dossier with the first lot, not after it.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: For New Delhi and India buyers the entry ladder on the WF-G family is a single sample board at 1-3 days, a private-label pilot from 100 pieces, and an ODM design programme from 500 pieces, with 15-30 day mass production once the specification is frozen.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Firmware customisation is handled by the same engineers who keep the reference BSP, so a New Delhi request for a custom launcher, a locked kiosk mode or an added peripheral driver goes into the maintained branch rather than into a one-off fork.

How are software updates and long-term support handled on the WF-G family?

Answer: The update model is wave-based. A New Delhi venue group can nominate a pilot site, hold the rest of the estate on the previous build, and only release the next wave once the pilot is clean. Rollback is built into the update client on every WF-G tier.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. AndroidSBC handles FBA and 3PL consolidation for the WF-G family, including serialised carton labels, pallet plans and the BIS / WPC documentation set for India customs at Port of Mumbai.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes, and the replacement stock is held on the same tiers as the original order. A New Delhi partner reports a DOA unit with evidence, AndroidSBC ships a replacement from buffer stock, and the failed board is analysed at the Longgang line rather than scrapped.

Contact AndroidSBC: Start Your WF-G3399 Sourcing Conversation

To start a WF-G smart guide kiosk Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, New Delhi integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to India buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-G family.